A small kitchen renovation in NYC usually costs about $30,000 to $60,000 in 2026, and a galley with stone counters and better appliances often lands around $55,000 to $75,000. Block Renovation puts a typical NYC galley remodel at $30,000 to $60,000. A NYC contractor quoted by Brick Underground put construction for a galley kitchen at about $25,000, with another $30,000 to $50,000 for stone, cabinets and appliances. A cosmetic refresh that keeps the layout can come in well under those numbers.
These are published market ranges, not quotes. If your kitchen is larger than a galley, our Manhattan kitchen renovation cost guide covers full size kitchens by tier.
How much does a small kitchen renovation cost in NYC?
| Scope | What it usually includes | Published figures |
|---|---|---|
| Cosmetic refresh | Refaced or painted cabinets, new counters, mid range appliances, same layout | $15,000 to $25,000 in NYC (Block); $12,000 to $20,000 national (Block) |
| Full galley renovation, same layout | New cabinets, counters, backsplash, flooring, lighting, appliances | $30,000 to $60,000 in NYC (Block); $35,000 national median (Houzz) |
| Galley with high end finishes | Custom cabinets, stone, panel ready or professional appliances | About $25,000 construction plus $30,000 to $50,000 in materials (Brick Underground) |
| Gut with layout changes | New walls, moved sink or range, opened wall | $50,000 to $80,000 national for kitchens under 100 square feet (Block), before the NYC premium |
The national figures need adjusting for NYC. Block estimates that NYC and other premium coastal metros run 15 to 35 percent above national averages. The 2026 Houzz and Home Study found a national median of $35,000 for a major remodel of a kitchen under 200 square feet, with the top 10 percent spending $93,000 or more.
The sources overlap but do not match. Block's $30,000 to $60,000 galley range and Brick Underground's $55,000 to $75,000 implied total meet in the middle, and the difference is mostly the finish level. Brick Underground's contractor was describing stone, cabinets and appliances at a higher grade.
Why a small kitchen does not cost much less
A galley has fewer cabinets and less counter than a large kitchen, but many costs are fixed. Block Renovation notes that fewer square feet does not mean a cheaper renovation, because crews, permits and labor minimums stay roughly the same. You still need a licensed plumber and electrician, building paperwork, floor and hallway protection, and debris removal.
Brick Underground also points out that a small kitchen with high end materials can cost more than a larger kitchen with budget materials. In a galley, finishes are a bigger share of the total, so the choices below move the number most.
Cabinets
Block says galley, one wall and tight L shape kitchens have 10 to 20 linear feet of cabinetry. Its installed prices per linear foot are $100 to $300 for stock, $200 to $650 for semicustom, and over $1,000 for custom. On 15 linear feet, that is roughly $1,500 to $4,500 for stock against $15,000 or more for custom.
Appliances
Brick Underground puts stock appliances at $400 to $3,000 each, and designer ranges and refrigerators at about $6,000 to over $10,000 each. Block puts a basic package at $4,000 to $6,000 and a mid tier package with a counter depth refrigerator and induction range at $8,000 to $12,000. Measure the freight elevator, the apartment door and the kitchen opening before ordering anything large.
Counters and backsplash
Brick Underground puts subway tile at about $25 per square foot installed and quartz, marble and other made to order surfaces at over $100 per square foot, with fabrication and installation often adding about 10 percent. A galley has little counter, so stone is one place where an upgrade costs less than in a large kitchen.
What fits in a galley kitchen?
A small NYC kitchen is usually a narrow galley or a single wall. The National Kitchen and Bath Association planning guidelines, summarized by CRD Design Build, set these targets:
- Work aisle: at least 42 inches for one cook and 48 inches for two, measured between counter fronts, tall cabinets and appliances.
- Walkway: at least 36 inches where people pass through but do not cook.
- Landing space by the range: 12 inches on one side and 15 inches on the other.
- Landing space by the refrigerator: 15 inches on the handle side.
- Dishwasher: within 36 inches of the sink.
These are guidelines, not code. Measure your aisle before you choose a layout. If it is under 42 inches, a counter depth refrigerator and appliances with doors that do not block each other matter more than any finish.
Galley layout options in a NYC apartment
Keep both runs where they are
The cheapest option. The sink, range and dishwasher stay on their existing lines, so no pipes move, and the money goes into cabinets, counters and appliances.
Go to the ceiling
When you cannot add floor space, add height. In a Block Renovation galley project, upper cabinets ran nearly to the ceiling to make up for the lack of floor space, and a counter depth refrigerator kept the walkway passable.
Open one wall
Removing the wall between a galley and the living room can create a breakfast bar and make the kitchen feel larger. In the same Block project, the bar sits where the wall was. Block notes that if the wall is structural, an engineer has to confirm what it carries and design a replacement beam, and that older buildings can hide brittle wiring and pipes behind plaster. The NYC Department of Buildings lists moving a load bearing wall as work that needs an ALT2 permit filed by an engineer or architect. Block said this project sat on the higher side of its $30,000 to $60,000 range because of the wall removal and a waterfall edge on the bar.
Move to a single wall
Putting everything on one wall frees the other side for storage or seating, but it means moving the sink, the range or both. Block puts moving a sink, range or wall at $3,000 to $15,000 in added cost, depending on what moves and how far. In a co-op, that is also where the board comes in.
Can you move plumbing or gas in a co-op kitchen?
Sometimes, within limits.
Plumbing. Moving a sink a few feet along the same wall is a very different request from moving the kitchen to another room. Block Renovation reports that most boards will not allow a wet room such as a kitchen over a neighbor's dry room such as a bedroom. Our post on the wet over dry rule explains how boards apply it.
Gas. The NYC Department of Buildings lists rerouting gas pipes as ALT2 work. A DOB spokesperson told Brick Underground that a Limited Alteration Application filed by a master plumber is reserved for minor work, such as shifting an existing legal gas line a few inches. A plumber in the same article said the process can require two DOB visits and two Con Edison visits, each passing inspection, and can take months. Expect to be without a working range until the inspections pass.
Going electric. Some buildings have moved away from gas entirely. Habitat reported on an Upper West Side co-op that switched to electric cooking after being told that keeping gas stoves would mean replacing all its gas lines. If moving gas is slow or blocked in your building, an induction range on a new electrical circuit is worth pricing. The circuit is electrical work and still needs a licensed electrician.
Every co-op and condo also requires an alteration agreement before kitchen work starts. Our guide to the co-op alteration agreement lists what boards ask for, and do I need a permit to renovate my NYC apartment covers which scopes trigger a DOB filing.
How to spend a small kitchen budget well
- Keep the sink and range where they are unless the new layout fixes a real problem.
- Price cabinets, stone and appliances first. Brick Underground's contractor said these items usually cost more than the construction in a galley.
- Hold a contingency of at least 15 percent, more in a prewar building. See prewar apartment renovation in Manhattan.
- Order appliances after the cabinet drawings are final, so cutouts match.
Euro Restoration gives a fixed price before work starts, puts a design specialist on every job, and has about 25 years of experience with co-op and condo boards. More on scope is on our Manhattan kitchen renovation page, and building notes for prewar co-ops are on our Upper East Side and Upper West Side pages. If the kitchen is part of a bigger project, see apartment renovation in NYC.
Frequently asked questions
How much does a galley kitchen renovation cost in NYC?
Published NYC figures run about $30,000 to $60,000 for a typical galley, and around $55,000 to $75,000 once stone, cabinets and appliances move up a grade. A cosmetic refresh can cost $15,000 to $25,000.
Is a small kitchen cheaper to renovate than a large one?
Somewhat, but not in proportion to size. Permits, licensed trades, building requirements and labor minimums stay about the same, and high end finishes in a small kitchen can cost more than budget finishes in a large one.
How wide should a galley kitchen aisle be?
The National Kitchen and Bath Association guideline is at least 42 inches for one cook and 48 inches for two, measured between counter and appliance fronts.
Can I move my stove in a NYC co-op?
Moving a gas range usually needs board approval and a DOB filing. Very small shifts of a legal line can go through a Limited Alteration Application by a master plumber, while larger reroutes need an engineer or architect, plus DOB and Con Edison inspections.
Can I open my galley kitchen to the living room?
Often, if the board approves and the wall is not structural, or if an engineer designs a replacement beam when it is. Removing a load bearing wall needs an ALT2 filing with the DOB.